Caple CM460 Manuale delle Istruzioni

Instruction ManualHI 9033 - HI 9034HI 9039 - HI 9130HI 933100 - HI 9635Portable WaterproofMulti-RangeConductivity/TDS/Fertilizer MetersinsrumnsCALON/O

10FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &SPECIFIC

11RANGE Conductivity 0.0 to 150.0 µS/cm150 to 1500 µS/cm1.50 to 15.00 mS/cm15.0 to 199.9 mS/cmTDS 0.0 to 150.0 mg/L (ppm)150 to 1500 mg/L (ppm)1.50 t

12INITIAL PREPARATIONEach meter is supplied complete with battery(ies). Remove the backcover, unwrap the battery(ies) and install it (them) while payi

13• TDS1 mode: TDS with 0.7 factor (shownon the secondary display)• TDS2 mode: TDS with 0.5 factor (shownon the secondary display)In the TDS mode, by

14Select the temperature (°C) mode by pressingFACTOR once.The secondary LCD figure will display a defaulttemperature of 25°C or the last recorded tem-

15For best results in calibrating your meter, choose a conductivity/TDSsolution that is closest in value to the sample to be measured.For example if y

16minutes if there is a temperature difference of 5°C (9°F) or morefor the ATC circuitry to compensate completely. •When the reading stabilizes, turn

17• Turn the instrument on by pressing ON/OFF and select theappropriate range (e.g. 1999 mg/L).• Tap the probe repeatedly on the bottom of the beaker

18PROCEDURE FOR HI 9039• Fill a beaker with 8 cm (3¼") of HI 7039or HI 8039 conductivity calibration solu-tion at 5000 µS/cm @25°C (if possiblefi

19CALBUFµS°CCALPROCEDURE FOR HI 933100• Make sure that the conductivity probe isconnected to the meter securely by align-ing the pins with the socket,

PRELIMINARY EXAMINATION...3GENERAL DESCRIPTION ...

20 •If the reading is within 15% of the theoretical value, the meterautomatically recognizes the buffer and the "BUF" symbol will stopflashi

21• Press CAL to display "84.0µS" together with the "CAL" symboland an intermittent "BUF" indicator. •If the reading is

22The conductivity of an aqueous solution is the measure of its ability tocarry an electrical current by means of ionic motion.The conductivity invari

23°C °F HI 7032 HI 7036mg/L g/L(ppm) (ppt)0 32 758 6.825 41 876 7.8810 50 999 8.9915 59 1122 10.1016 60.8 1148 10.3317 62.6 1173 10.5618 64.4 1200 10

24FERTILIZER CALIBRATIONFERTILIZER CALIBRATIONFERTILIZER CALIBRATIONFERTILIZER CALIBRATIONFERTILIZER CALIBRATION(((((HI HI HI HI HI 9039 9039 9039 903

25TEMPERATURE COEFFICIENTTEMPERATURE COEFFICIENTTEMPERATURE COEFFICIENTTEMPERATURE COEFFICIENTTEMPERATURE COEFFICIENT(HI 933100 (HI 933100 (HI 933100

26• Measure the sample at a different temperature "t°C" which shouldbe between 5°C to 10°C different from 25°C and note theconductivity read

27TEMPERATURE CALIBRATIONTEMPERATURE CALIBRATIONTEMPERATURE CALIBRATIONTEMPERATURE CALIBRATIONTEMPERATURE CALIBRATION(HI 9039, HI 933100(HI 9039, HI 9

28• Immerse the conductivity probe into the50°C (122°F) bath and wait for a coupleof minutes for thermal equilibrium.• Press CAL to display the "

29µS Measurement in µS/cm (except HI 9034)mS Measurement in mS/cm (except HI 9034)For HI 9033, HI 9034 and HI 9130 only1Out of rangeV Low battery volt

3HI 9033, HI 9034, HI 9039, HI 9130, HI 933100 and HI 9635 aremultirange conductivity/TDS meters with Automatic Temperature Com-pensation. These meter

30Rinse the probe with tap wa-ter after every series ofmeasurements. If a more thor-ough cleaning is required,remove the PVC sleeve andclean the probe

31VThe meters are supplied with the advanced"BEPS" technology. BEPS, or Battery ErrorPreventive System, will detect a low powercondition in

32CONDUCTIVITY & TDS CALIBRATION SOLUTIONSHI 7030L 12880 µS/cm (µmho/cm), 460 mLHI 7030M 12880 µS/cm (µmho/cm), 230 mLHI 7031L 1413 µS/cm (µmho/cm

33HI 731326 Small screwdrivers, length 90 mm, for calibrationpurposes (20 pcs) (for HI 9033, HI 9034 and HI 9130only)HI 76301W 4-ring probe without te

34Recommendations for UsersBefore using these products, make sure that they are entirely suitable for the environ-ment in which they are used.Operatio

• CALIBRATION AND MAINTENANCE SOLUTIONS• CHEMICAL TEST KITS• CHLORINE METERS• DISSOLVED OXYGEN METERS• HYGROMETERS• ION SPECIFIC METERS (Colorimeters)

http://www.hannainst.comHANNA LITERATUREHANNA LITERATUREHANNA LITERATUREHANNA LITERATUREHANNA LITERATUREMANCONWPR303/00PRINTED IN PORTUGALHanna publis

4cally compensated for by the ATC circuitry of the meters. The stainlesssteel rings of the probe have a large surface for better response andeasy clea

5FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &SPECIFICA

6FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &SPECIFICA

7FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &SPECIFICA

8FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &SPECIFICA

9FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &FUNCTIONAL DESCRIPTION &SPECIFICA