Caple C871i Manuale Utente Pagina 22

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 572
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 21
Apple II Computer Info
#############################################################################
### FILE : adb.problem
#############################################################################
### Created : Wednesday, June 10, 1998 Modified: Wednesday, June 10, 1998
### File Type: "TEXT" File Creator: "LMAN"
### File Size: 4161 bytes 4 KB
#############################################################################
Path:
news1.icaen!news.uiowa.edu!iagnet.net!iagnet.net!NewsNG.Chicago.Qual.Net!Qual.Net!
ais.net!nntp.giganews.com!newsgate.swbell.net!151.164.30.35.MISMATCH!cyclone.swbel
l.net!swbell!not-for-mail
From: Rubywand <[email protected]>
Newsgroups: comp.sys.apple2
Subject: Re: help with broken GS
Date: Wed, 10 Jun 1998 05:44:16 -0500
Organization: Southwestern Bell Internet Services, Richardson, TX
Lines: 80
Message-ID: <[email protected]>
References: <[email protected]>
NNTP-Posting-Host: ppp-207-193-8-21.hstntx.swbell.net
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Trace: (null) 897475466 10652 (None) 207.193.8.21
X-Complaints-To: usenet@nnrp3
X-Mailer: Mozilla 4.04 [en] (Win95; I)
Xref: news1.icaen comp.sys.apple2:135111
Jon Christopher Co writes ...
>
> I was using my GS and smoke started coming out from the inside. after
> opening it up my best guess tells me the smoke came from an 8 legged
> chip right under the power supply at the upper leftmost corner (right
> behind the composite video connector and ADB jack). Right now the
> computer still boots up, but will not respond to any ADB device
> (keyboard). can anybody identify what this chip is? i also noticed
> there is a slight bump in the middle.. is this normal or is it > supposed to be
perfectly flat?
My guess is that the chip or module you are talking about is L2
"D-15C". This is an 8-pin thing with 4 inductors (coils). Three
inductors are used. They are in series with the ADB Desktop connector.
Evidently, one of the inductors burned out. This would explain the
loss of ADB functioning and the bump on the module.
Repairing the burned out inductor should be fairly easy, although
it will probably be necessary to remove the motherboard. You could take
a length of thin wire-- like wirewrap wire-- make a small coil, and
connect it across the terminals of the module corresponding to the
burned-out inductor.
The three inductors run ...
pin 1 to pin 8
Apple II Computer Technical Information : Apple II Family Hardware Info
ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 22 of 572
Vedere la pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 571 572

Commenti su questo manuale

Nessun commento