Caple C891C Specifiche Scaricare il pdf (Pagina 11)

LED Information in Viewfinder

When the shutter button is lightly depressed by the bulb of the forefinger, photographing data will be shown in

the finder. The red-colored LED with which all data, aperture values and warnings for the prevention of

photographing errors, are so arranged as to be readily understood, will be turned on or flicker.

· In AE photography under a fluorescent lamp, there are cases in which two LEDs for indication of the correct

aperture value are seen turned on. This phenomenon is caused by the flickering of the fluorescent lamp, so

pictures can continuously be taken.

(1) Indication of the correct aperture value -- The LED for one of the aperture values from f/1.4 to f/22 will be

turned on, indicating the correct aperture value in AE photography.

(2)Warning against an under-exposure --The LED for f/1.0 (intermediate between M and f/1.4) will flicker.

(3) Warning against an over-exposure - The LED for f/22 will flicker.

(4) Manual indication - The LED for M will flicker and the LED for some of the aperture values between f/1.4

and f/22 will be turned on indicating the correct exposure (with the use of a Hexanon AR lens).

(5) Warning against a rundown of the cells-- The LEDs for f/1.0 (intermediate between M and f/1.4) and f/22

will alternately flicker.

(6) Indication for stopped-down metering - The LED of f/1.0 (in between M and f/1.4) is the fixed-point mark,

and the correct exposure will be assured when the mark is turned on. The LED flickers at M.

(7) Indication for completed recharge of the electronic flash unit--When the recharge of the exclusive electronic

light unit (X-24) is completed, the LED either for f/5.6 or f/11 will flicker.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Nessun commento

Caple C891C Specifiche Pagina 11