Caple C891C Specifiche Scaricare il pdf (Pagina 7)

1 ) Pull up the film rewind knob and then pull it with

bigger force, and the back cover will open.4.butkus.or g

2) Insert a cassette into the cassette chamber and push

the film rewind knob down to the original position. If

the knob stops halfway, turn it clockwise and

counterclockwise, and the knob will go down.

3) Pull out the film while slightly depressing the film outlet of the cassette. Stretch it out until it comes over the

roller. Place it on the roller.

For film with a longer leader, pull it out until the first

two or three perforations on the upper side make their

appearance.

Make sure that the film does not warp and that the film

outlet of the cassette is not lifted out.

Push the film leader onto the film channel

on the lower side.

4) Push down the back cover and make sure that it is tightly closed.

5) Cock the film transport lever until it does not move further. Repeat

this action three or four times until the figure "1" appears in the film

counter.

As long as the film transport flicker turns during the course of this

action, the film is being transported properly

There is no need to click the shutter during this time.

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Nessun commento

Caple C891C Specifiche Pagina 7